Briquetting press Falach 30

Briketovací lis Falach 30FALACH 30 is briquetting press which for your carpentry firm solves the problem of what to do with sawdust or shavings. Part of the device is a hydraulic system, wire conveyor and rack for one sack.These types of presses have increased volumes of the oil tanks instead of the hydraulic oil cooler

Technical data of briquetting press FALACH 30 

 

The table below will provide informations about important technical parameters of briquetting press FALACH 30.

 

 

   Type identification FALACH 30
   Dimensions – lenght - width - height 186 - 89 - 110  cm
   Briquette diameter 50  mm
   Press capacity 25 - 40 kg/hour
   Weight of press 400 kg
   Hopper volume 0,33 m3
   Pump motor input 4 kw
   Power consumption 2.2 kw/hour
   Oil cooler no
   Operation continuous
   Automatic switching-out no
   Specific weight of briquettes 900 kg/m3
   Maximum noise level 68 dB

 

The equivalent level of acoustic pressure at the operator´s post does not exceed 70,0 dB ( 68 dB ).  

Warranty and post-warranty service of briquetting presses FALACH

 

FALACH company provides 12 months guarantee on all kinds of briquetting presses FALACH and further agrees to hold customer service 10 years after the warranty period.

 

Important information when operating briquetting machine


 

  1. Prohibition of connecting devices to the divorce, which does not match valid regulations (allowed variation of the nominal amount of power supply voltage is 10%).
  2. Do not exceed the setting of maximum pressure of 14 MPa.
  3. Any repair, modification, maintenance and cleaning work is to be carried out when the machine is turned off, disconnected from the power source.
  4. Do not expose the press to excessively moist environment and protected it against weather conditions.
  5. When the machine is operating avoid direct contact with moving parts of the press (mainly the front clamp and press die, then the feeding wheel inside the hopper).
  6. It is prohibited to extinguish press, when energized, with water or foam fire extinguisher, because there is a risk of electric shock (recommended extinguishing powder, snow or halon). 

We confirm that this briquetting press FALACH 30 satisfies the conditions of the following specifications and standards:

ČSN EN ISO 12100-1, ČSN EN ISO 12100-2, ČSN EN 60204-1, ČSN EN 61000-6-4, ČSN EN 55011, ČSN EN 982, ČSN EN 954-1, ČSN EN ISO 14121-1.

Are you interested in more information about the briquetting press FALACH 30?
 

If you are interested in additional information about the briquetting presses, please contact us through our contact form and we shall be glad to answer your questions.  

 

 

Contact form

Contacts

info@falach.eu

News